Structural Concepts Reveal NR3651RRSSV handleiding

Niet gecategoriseerd

Structural Concepts

37 pagina's

PDF beschikbaar

Handleiding

OVERVIEW / DISPLAY TYPE I vs. II / COMPLIANCE / WARNINGS / PRECAUTIONS - PAGE 1 of 2

WARNING

Hazardous moving parts. Do not operate unit with covers removed.

Fan blades may be exposed when deck panel is removed.

Disconnect power before removing deck panel.

WARNING

Risk of electric shock. Disconnect power before servicing unit.

CAUTION! More than one source of electrical supply is

employed with units that have separate circuits.

Disconnect ALL ELECTRICAL SOURCES before servicing.

WARNING

ELECTRICAL

HAZARD

WARNING

KEEP

HANDS

CLEAR

OVERVIEW

• These Structural Concepts Reveal® cases are

designed to merchandise packaged products at

40 °F (4 °C) or less product temperatures.

• Cases should be installed and operated according to

this operating manual’s instructions to insure proper

performance. Improper use will void warranty.

NSF/ANSI TYPE I vs. II ENVIRONMENTAL CONDITIONS

This unit is designed for the display of products in ambient

environmental conditions where temperatures and relative

humidity are maintained within a specific range.

•

NSF/ANSI Type I Conditions: Product is displayed in

store conditions with maximum ambient temperature of

75 °F (24 °C) and maximum relative humidity of 55%.

•

NSF/ANSI Type II Conditions: Product is displayed in store

conditions with maximum ambient temperature of 80 °F

(27 °C) and maximum relative humidity of 55%.

• If you are unsure if your unit is classified as NSF/ANSI

Type I or Type II, see tag next to serial label on your case.

COMPLIANCE

• Performance issues when in violation of applicable

NEC, federal, state and local electrical and plumbing

codes are not covered by warranty. See below:

WARNINGS

• Please read the important warnings in this document

carefully as they can prevent injury or death.

• See next page for PRECAUTIONS.

COMPLIANCE

This equipment MUST be installed in compliance with

all applicable NEC, federal, state and local

electrical and plumbing codes.

ATTENTION

CONTRACTORS

CAUTION! IF YOUR UNIT IS SELF-CONTAINED, YOU MUST

CHECK CONDENSATE PAN POSITION & PLUG!

Water on flooring can cause extensive damage!

Before powering up unit, check and confirm that:

• Condensate pan is DIRECTLY UNDER condensate drain.

• Condensate pan plug is securely plugged into receptacle.

• Overflow pan has plug connected to its box. Units with optional Clean

Sweep® MUST HAVE two plugs connected.

WARNING: This product can expose you to chemicals, including

Urethane (Ethyl Carbamate), which are known to the state of

California to cause cancer and birth defects or other reproductive

harm. For more information go to P65Warnings.ca.gov.

Bekijk gratis de handleiding van Structural Concepts Reveal NR3651RRSSV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.