Structural Concepts Reveal NR3635DSV handleiding

Niet gecategoriseerd

Structural Concepts

15 pagina's

PDF beschikbaar

Handleiding

CASE DESIGN, CONT’D: PLUG & CORD / LED LIGHTS & SWITCH FIXTURES / REAR SLIDING DOORS

3. Power Cord and Plug

• Power cord and plug (for LED lights) is at case

rear (shown below).

• Caution! You must plugged in an approved outlet!

4. LED Light Switch Location

• Light switch is in column cover (accessible by

sliding open door at case rear).

• See illustrations below-right.

LED

Lights In

Shelving

And

Header

Model NR4835DSV

Countertop Unit (Shown) May

Not Exactly Reflect Every

Feature or Option of Your

Particular Case.

Support Base

LED Light

Switch

5. LED Lights

• LED lights are located at both header and

shelving of case (as shown below).

• Check that ALL of the light plugs are properly

connected to the LED light.

• Plug must be inserted ALL THE WAY into the

LED light orifice (with no gap) to work properly.

• See TROUBLESHOOTING section in manual

if LED lights malfunction.

6. Rear Sliding Door Removal / Replacement

• To remove rear sliding doors, move doors toward

center of case.

• Individually lift each door up toward the top of the

case; pivot the bottom of the door out.

• Return doors to case in reverse order they were

removed.

Rear Sliding

Doors

Plug & Cord

LED Light

Plug

Bekijk gratis de handleiding van Structural Concepts Reveal NR3635DSV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.