Structural Concepts Reveal NE6020RSV handleiding

Niet gecategoriseerd

Structural Concepts

22 pagina's

PDF beschikbaar

Handleiding

Reveal® User Manual 8

Installation: Start Up

Plug Case In/Turn On Main Power Switch:

• Do not use an extension cord with this case.

• Do not operate this equipment with a damaged cord,

plug, or outlet.

• Ensure that the main power switch is off.

• Plug the cord into a certied 110V electrical outlet with

ground.

• Turn main power switch on.

• Coil fans should turn on.

• From inside of the case, check for discharge air from

front bafe, to conrm that the fans are functioning

properly.

• When the case is in a start-up mode or has been idle

for a long period of time, unit may require 75 minutes

running time to pull down the temperature.

• Turn lights on.

• Light switch is located on the ceiling of merchandising

area.

• The lights should come on at the same time.

• Always maintain front and rear airow clearance of four

inches.

• Obstruction or restriction of air can void warranty.

• Note: Case temperature setting is determined by case

size. Temperature is controlled by a thermostat.

Factory-Supplied Power Cord

With Plug

Main Power Switch

Light Switch

Bekijk gratis de handleiding van Structural Concepts Reveal NE6020RSV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.