Structural Concepts Reveal NE4835HSV handleiding

Niet gecategoriseerd

Structural Concepts

29 pagina's

PDF beschikbaar

Handleiding

CASE STARTUP: HEATER SETTINGS / LIGHTS SWITCH / SHUTTING DOWN CASE / KEY STORAGE

3. Light Switch

• Turn lights switch “ON” to turn on lights.

• All LED lights will come on at the same time.

4. Shutting Down Case

• Remove all product from case.

• Turn main power switch to “OFF” position.

• Caution! Deck and shelving is hot. Allow case

to cool for 45 minutes before cleaning.

• Note: When main power is turned back on, you do

NOT need to re-enter settings. Temperatures will

revert back to LATEST SETTINGS before

shutdown.

5. Control Lever Key Storage Location

• For units with passive humidification systems, a

control lever key is provided. It is designed with a

magnet to hold it securely.

• Control lever key may be stored at case rear (as

shown in illustration).

1. Main Power Switch

• Control panel (at case rear) is accessible by

removing lower-rear panel.

• Turn main power switch “ON” to energize case.

2. Heating Up Case / Adjusting Settings

• Note: Case is designed to MAINTAIN product

temperatures – NOT heat up product! Do not place

product that is cold or ambient temperature in case.

• Before placing pre-heated food in case, allow

1 1/2 hours (90-minutes) for case to achieve its

desired temperature.

• If adjusting heater settings, allow 20 minutes at

new settings for temperature to affect product.

Model Shown May Not Exactly

Reflect Every Feature or Option

of Your Particular Case.

Programmable

Controller

Lights

Switch

Main Power

Switch

Lower Rear

Panel

Recommended Storage Location

of Humidity Control Lever Key

(Via Magnet on Key)

*Note: If “HUMIDITY” etching is on faceplate, simply ignore; such markings are not applicable to cases in this manual.

Bekijk gratis de handleiding van Structural Concepts Reveal NE4835HSV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.