Structural Concepts Reveal NE4835HSSV handleiding

Niet gecategoriseerd

Structural Concepts

25 pagina's

PDF beschikbaar

Handleiding

CASE STARTUP / HEATER SETTINGS / LIGHTS SWITCH / SHUTTING DOWN CASE

1. Main Power Switch

• Control panel (at case rear) is accessible after

removal of lower-rear panel.

• Turn main power switch “ON” to energize case.

2. Heating Up Case / Adjusting Settings

• Note: Cases are designed to MAINTAIN product

temperatures – NOT heat up product! Do not place

product that is cold or ambient temperature in case.

• Before placing pre-heated food in case, allow

1 1/2 hours (90-minutes) for case to achieve its

desired temperature.

• If adjusting heater settings, allow 20 minutes at

new settings for temperature to affect product.

3. Light Switch

• Control panel (at case rear) is accessible after

removal of lower-rear panel.

• Turn lights switch “ON” to turn on lights.

• All LED lights will come on at the same time.

4. Shutting Down Case

• Remove all product from case.

• Turn main power switch to “OFF” position.

• Caution! Deck and shelving are hot. Allow case

to cool for 45 minutes before cleaning.

• Note: When main power is turned back on, you do

NOT need to re-enter settings. Temperatures will

revert back to your LATEST SETTINGS before

shutdown.

Programmable

Controllers*

Model NE4835HSSV Slide-In Unit

(Shown) May Not Exactly Reflect

Every Feature or Option of

Your Particular Case.

Lights

Switch

Main Power

Switch

*Note: Only taller units have upper and lower heaters (with two programmable controllers). All others have only ONE

heater (with ONE programmable controller).

> If “HUMIDITY” etching is on faceplate, simply ignore; such markings are not applicable to cases in user manual.

Bekijk gratis de handleiding van Structural Concepts Reveal NE4835HSSV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.