Structural Concepts Reveal NE4820HSSV handleiding

Niet gecategoriseerd

Structural Concepts

25 pagina's

PDF beschikbaar

Handleiding

INSTALLATION: DISCONNECTION & REMOVAL OF CASE FROM SKID / REVIEW CASE SURROUNDINGS

1. Disconnect Case From Skid

• Remove screws from shipping brackets.

Remove and discard shipping brackets from

Skid.

• Place J-bar/pry under base frame.

Raise case up from Skid to take weight off

casters.

• With case raised, lower casters all the way

down against Skid (see next step for detailed

instructions on lowering or raising casters).

• Remove rubber shipping blocks.

Skid

Support case

while removing

from Skid

Handles

2. Carefully Remove Case From Skid

• Use handles to carefully slide case to

rear of Skid (see illustration at right).

• Caution! 4 people may be required

for this task!

• Carefully lower to floor. Slide Skid

from under case.

• Maintain support of case at all

times or center of gravity may

cause case to fall.

Skid

Rubber Shipping

Blocks (Typ.)

Shipping

Bracket (Typ.)

3. Review Case Surroundings

• Check if case is affected by

HVAC vents or outside door

airflow. If so, such airflow must

be prevented from entering the

case.

• Otherwise, the case’s ‘air

screen’ may be compromised

causing unsafe food

temperatures.

• See sample illustrations shown

at right.

Sample

HVAC Vents

Bekijk gratis de handleiding van Structural Concepts Reveal NE4820HSSV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.