Structural Concepts Reveal NE4820DSSV handleiding

Niet gecategoriseerd

Structural Concepts

20 pagina's

PDF beschikbaar

Handleiding

INSTALLATION, CONT’D: APPLY SEALANT / SLIDE IN (OR DROP-IN) COUNTER / ENERGIZE CASE

11. Apply Silicone Sealant To Underside of

Base Support / Place Case On/Into Counter

• To assure a secure seal, thoroughly clean both

counter and underside of base support prior to

proceeding.

• Silicone must meet or exceed food grade NSF/

ANSI Standard 51. See sample illustration at

top-right.

• Apply a thin, UNINTERRUPTED bead of silicone

sealant to underside of base support before

placing unit into position on counter.

• Carefully slide case (or drop case) into counter.

12. Plug Case In / Case Will Energize

• Power cord with plug is factory-supplied.

• Plug case into customer-supplied electrical outlet.

Case will energize.

• Turn on LED light switch at rear-right upright.

• See illustration below.

Model NE4827DSSV Slide-In

Units (Shown) May Not Exactly

Reflect Every Feature or

Option of Your Particular Case.

Sample NSF/Ansi

Standard 51 Sealant

Lower Rear

Panel

Upper Rear

Panel

Power Cord And Plug

LED Light

Switch

13. Slide-In Units: Reattach Upper and Lower

Rear Panels

• Rear panels are held in place by magnets.

• Lower rear panel has a slot for power cord.

• See illustration below.

14. Drop-In Units: Reattach Lower Rear Panel

• Lower rear panel may be attached to case after it

has been dropped in countertop.

• If lower magnets have been removed from case

(for drop-in), you must REATTACH them in same

position for lower attachment to be held in place.

• Do not return upper rear panel to case.

Bekijk gratis de handleiding van Structural Concepts Reveal NE4820DSSV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.