Structural Concepts Oasis FSIB8R handleiding

Niet gecategoriseerd

Structural Concepts

30 pagina's

PDF beschikbaar

Handleiding

OVERVIEW / TYPE / COMPLIANCE / WARNINGS / PRECAUTIONS / WIRING / PLUGS - PAGE 2 of 2

PRECAUTIONS

• Following are important precautions to prevent

damage to unit or merchandise.

• Please read carefully!

• See previous page for specifics on OVERVIEW,

TYPE, COMPLIANCE and WARNINGS.

WIRING DIAGRAM

• Each case has its own wiring diagram folded and in its

own packet.

• Wiring diagram placement may vary; it may be placed

near ballast box, field wiring box, raceway cover, or

other related location.

REFRIGERANT DISCLOSURE STATEMENT

• This equipment is prohibited from use in California

with any refrigerants on the “List of Prohibited

Substances” for that specific end-use, in accordance

with California Code of Regulations, title 17, section

95374.

• This disclosure statement has been reviewed and

approved by Structural Concepts and Structural

Concepts attests, under penalty of perjury, that these

statements are true and accurate.

WIRING DIAGRAM FORMAT & LOCATION

• Each case has its own wiring diagram folded and in its own packet.

• Wiring diagram placement may vary; it may be placed near ballast

box, field wiring box, raceway cover, or other related location.

CAUTION! GFCI BREAKER USE REQUIREMENT

If N.E.C. (National Electric Code) or your local code

requires GFCI (Ground Fault Circuit Interrupter) protection,

you MUST use a GFCI breaker in lieu of a GFCI receptacle.

CAUTION! DO NOT RELY ON THERMOMETERS OR

THERMOSTATS FOR PRODUCT (FOOD) TEMPERATURES.

• Thermometers & thermostats reflect air temperatures ONLY.

• For ACTUAL product (food) temperatures, use a calibrated food

probe thermometers ONLY.

• For accurate readings, DO NOT use infrared food thermometers.

CAUTION! ADVERSE CONDITIONS / SPACING ISSUES

• Performance issues caused by adverse conditions are NOT warranted.

• To prevent damage to end panels due to condensation, apply industrial grade

silicone sealant and tightly join to opposite end panels. When not adjoining

cases, keep end panels at least 6” away from walls and structures. Rear

panels must also be kept at least 6” from walls and structures.

• Case must not be exposed to direct sunlight or any heat source.

• To maintain proper case temperature, keep case at least 15-feet from exterior

doors, overhead HVAC vents or any air curtain disruption.

• Self-contained case clearance: 6” min. air intake / 6” min. air discharge.

CAUTION

Bekijk gratis de handleiding van Structural Concepts Oasis FSIB8R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.