Structural Concepts Oasis BD4732 handleiding
Handleiding
Je bekijkt pagina 20 van 25
20
CONDITION TROUBLESHOOTING
Weight Sensors On
Shelf/Shelves Are
Malfunctioning
Contact Instant Retail Services.
Color-Coded Lights
On Shelf/Shelves
Are Malfunctioning
Contact Instant Retail Services.
Screen/Monitor Is
Malfunctioning
Contact Instant Retail Services.
Payment Processor
Is Malfunctioning
Contact Instant Retail Services.
Case Is Not Holding
Temperature
If a large amount of warm product was added to the case, it will take time for the
temperature to adjust. Please load case with pre-chilled product.
Temperature changes during defrost mode but will return to normal. Fourth LED
will indicate defrost cycle in progress.
Check that case is not directly in the sun.
Check that condenser coil has been cleaned.
Check air return opening for obstructions.
Check sight glass for flashing and/or low charge.
Check set point temperature; it may be adjusted too high.
Condensing Unit Is
Not Operating
Check that the power is turned on.
Check if programmable controller settings are properly set. See your case’s serial
label for your model’s specified settings. See SERIAL LABEL LOCATION &
INFORMATION LISTED / TECH INFO & SERVICE section in manual for label
location, etc.
TROUBLESHOOTING (TO BE PERFORMED BY TRAINED SERVICE PROVIDER ONLY) - PAGE 3 of 3
Bekijk gratis de handleiding van Structural Concepts Oasis BD4732, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Structural Concepts |
| Model | Oasis BD4732 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8246 MB |
