Structural Concepts Impulse CGSV6922 handleiding

Niet gecategoriseerd

Structural Concepts

12 pagina's

PDF beschikbaar

Handleiding

CASE STARTUP / LED LIGHT FIXTURE REPOSITIONING (SERVICE VS. SELF-SERVICE / LED DRIVER)

3. LED Light Fixture Repositioning

• Service cases have LED lights opposite uprights.

• Self-Service cases have LED lights positioned

near uprights.

• Important! You must reposition LED lights if

changing case from service to self service

(or vice versa). See below for illustrations.

4. LED Driver

• LED driver box is located at rear-underside of unit.

• See next page for access instructions.

ON OFF

1. Case Startup

• Case will be energized when plugged into outlet.

• Lights will turn on when rocker switch (located at

case upright) is turned on.

2. LED Light Fixtures

• LED lights are located at both header and shelving

of case (as shown below).

• Check that ALL of the light plugs are properly

connected to the LED light.

• Plug must be inserted ALL THE WAY into the

LED light orifice (with no gap) to work properly.

LED Driver

And Box

LED Lights

Rocker Switch

3-Prong

Plug

Note: Lower Shelf LED Light Is An

Optional “Upcharge” Item. It May Be

Ordered As An Aftermarket Piece With

A Harness And Installed In The Field.

Service Case

Shown

Self-Service

Case Shown

LED Light (Under Header) Typ.

LED Light

(Under Shelves) Typ.

Bekijk gratis de handleiding van Structural Concepts Impulse CGSV6922, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.