Structural Concepts Impulse CGSV6922 handleiding

Niet gecategoriseerd

Structural Concepts

12 pagina's

PDF beschikbaar

Handleiding

CASE AT SHIPMENT / BLOCK REMOVAL / SEPARATELY SHIPPED SHELVES & THEIR PLACEMENT

4. Open case’s hinged door. Follow steps A through E to

place shelving components into case ONE AT A TIME.

Note: Insert lowest shelf components first, followed

by top shelf components.

A. Side brackets: Insert into upright slots (following

bracket/slot pattern shown in view #7).

B. Bottom shelf: LED lighting is optional. If LED light is in

kit, attach under front rung. Attach front rung between

shelving brackets. Insert LED plug into light. Route wires into

wire clips that are attached to side bracket. Connect the

opposite-end LED plug into upright connectors.

C. Rear rungs: Attach to shelving brackets.

D. Metal shelving: Attach atop shelving brackets.

E. Top shelf: LED lighting is standard. Follow items A-D

(above) shelving component attachment instructions.

5. View of case awaiting shelving components.

6. View of assembled shelf (for illustrative purposes only).

7. View of recommended slot spacing after shelving has

been properly inserted into case.

> After shelving has been properly placed in case (and

LED lights have been properly connected), turn lights on.

> Note: Service case shown. This process is also applicable

to self-service cases. See next page for slot spacing guide.

Follow These Instructions For Proper Case

Removal From Skid / Shipping Block Removal /

Shelving Component Access & Placement, Etc.

1. View of case at shipment (no shelves installed / skid

not shown).

2. Remove shipping blocks from case underside

(attached to skid with screws). Set case on counter.

3. Carefully remove separately shipped shelving from

its protective bubble wrap.

Side Bracket

Side

Bracket

Rear Rung

Metal Shelf

LED Wire

Bekijk gratis de handleiding van Structural Concepts Impulse CGSV6922, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.