Structural Concepts Impulse CGSV4522 handleiding

Niet gecategoriseerd

Structural Concepts

12 pagina's

PDF beschikbaar

Handleiding

TROUBLESHOOTING

System is not

Operating

Confirm the utility power is on (authorized personnel only).

Check the circuit breaker box for tripped circuits (authorized personnel only).

Case Lights Not

Working

Check that light switch is in the ON position.

• See CASE STARTUP / LED LIGHT REMOVAL & REPLACEMENT / LED

DRIVER BOX section in manual for switch location (regardless of case design).

If case is not hard-wired, check that power cord is properly connected to wall outlet.

Check that ALL of the light plugs are properly connected to the LED light.

• Plug must be inserted ALL THE WAY into the LED light orifice (with no gap).

• See illustrations below.

Power may not be reaching the case.

• Contact store management to have trained service provider perform

troubleshooting.

If case light still do not come on, it may need to be replaced.

• Contact Structural Concepts’ Technical Service Department for replacement

light (see TECHNICAL SERVICE section of this manual for contact

information).

• To replace, disconnect plug from existing LED light. Disconnect LED light from

its brackets. Replace with new LED light. Insert plug ALL THE WAY into LED

light orifice.

--- “Barrel-Shaped” LED Plug & Light Fixture ---

LED Light

Plug

LED’s Barrel

Shaped Insert

No Gap

Gap

Bekijk gratis de handleiding van Structural Concepts Impulse CGSV4522, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.