Structural Concepts Harmony HMBC3 handleiding

Koelkast

Structural Concepts

37 pagina's

PDF beschikbaar

Handleiding

INSTALLATION, CONTINUED: SETUP / POWER CORDS / TEMPERATURE CONTROLLER

8. Merchandiser Setup: Self Contained Units

 Remove lower front grille; see INSTALLATION:

REMOVAL FROM SKID, REMOVING LOWER

FRONT GRILLE section in this manual for

instructions.

 Insure that the Condenser Pan is installed under

the PVC condensate drain trap.

 Insure that the Condenser Pan is plugged into

the receptacle inside base.

 Return front grille to case.



See Drain, Hose and Bracket Placement

section in Operating Manual for details.

9.a. Self-contained refrigeration with power

cord

 For your safety, equipment is furnished with

a properly grounded cord connector. Do not

attempt to defeat the grounded connector.

 Plug cord into a certified electrical outlet with

ground.

9.b. Self-Contained refrigeration without

power cord

 Remove the rear lower grille required).

 Note: The compressor/condenser assembly can

be slid out to facilitate maintenance.

 Electrical leads are provided inside the base ex-

iting the ballast box.

 Leads are labeled for identification.

9.c. Self-Contained Temperature Controller

 See below for location.

 See Temperature Controller section for

additional information.

Above view shown with rear panel and end panel

removed for illustrative purposes only.

Condenser

Pan

PVC Condensate

Drain

Temperature

Controller

Bekijk gratis de handleiding van Structural Concepts Harmony HMBC3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.