Structural Concepts Harmony HMBC2-QS handleiding
Handleiding
Je bekijkt pagina 11 van 37

11
INSTALLATION, CONTINUED: REMOTE UNIT ELEC. LEADS / REFRIG. & DRAIN CONNECTIONS
10. Merchandiser Setup: Remote Units
Remote Refrigeration System
Note: Service to be accomplished by refrigeration /
electrical contractor.
10.a. Electrical leads
Remove screws from rear wire-way cover to
access electrical leads.
Wiring may run case to case.
Knockout is provided in bottom of wireway for
stub-up connection.
Separate leads for lights that are labeled
accordingly.
10.b. Refrigerant Connection
Remove the front panel.
Refrigerant stub-up access opening is at the
front on the left hand side of the base.
Route refrigerant lines thru access hole.
Remove tube caps from stub up
connections
Sweat the high and low pressure
connections.
Fill access hole with suitable filler to insure
watertight integrity of tub.
10.c. Drain Connection
1” male PVC stub-up connection is under the
case on the right hand side.
Remove the front panel.
Remove the rear panel (optional).
Connect tub drain to floor drain. Maintain 1/4”
fall per foot to provide proper drainage.
Below illustration may not exactly reflect
every feature or option of your case.
Evaporator Stub
Ups Access
Drain Connection
General Location
Case
Front
Case
Rear
Bekijk gratis de handleiding van Structural Concepts Harmony HMBC2-QS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Structural Concepts |
Model | Harmony HMBC2-QS |
Categorie | Koelkast |
Taal | Nederlands |
Grootte | 10459 MB |