Structural Concepts Grocerant FB4SS-3R handleiding

Niet gecategoriseerd

Structural Concepts

27 pagina's

PDF beschikbaar

Handleiding

CLEANING SCHEDULE: STAINLESS STEEL

Stainless Steel Cleaning

General Stainless Steel Surface Cleaning (To Be Performed As Often As Needed):

• Certain grades of stainless steel are more prone to corrosion than others.

• Stainless steel can be exposed to many contaminants, which if left untreated can cause stains and rust.

• Stainless steel requires a specific cleaning procedure to maintain its sheen and remain rust-free.

• Wash with a solution of liquid dishwashing detergent and hot water.

• Rinse with pure hot water from spray bottle. Wipe with clean sponge. This will remove soap residue

that can lodge in stainless steel’s microscopic grooves, causing rust.

• Dry with clean, soft cloth or paper towel.

• Caution! To prevent rust, you MUST rinse with pure hot water from a spray bottle while wiping with

clean sponge after EACH cleaning.

• Caution! Never clean with scouring powder or steel wool as they mar, scratch and/or erode the surface

of stainless steel. When surface properties of stainless steel have been compromised, rust may form.

Brightening:

• Method 1: Brighten by polishing with a soft cloth or sponge with a solution of one part vinegar to 2 parts

water in a spray bottle.

• Method 2: Sprinkle baking soda on sponge and rub gently with soft cloth or sponge.

• Caution! To prevent rust, you MUST rinse with pure hot water from a spray bottle while wiping with

clean sponge after EACH cleaning.

• Dry with clean, soft cloth or paper towel.

Removing Streaks or Stains:

• Method 1: Place two teaspoons of rubbing alcohol on a microfiber cloth or pad. Rub the cloth along the

grain of the appliance until the entire area has been wiped. The rubbing alcohol will air dry itself.

• Method 2: Dip soft cloth or sponge in club soda and rub gently over area of concern.

• Caution! To prevent rust, you MUST rinse with pure hot water from a spray bottle while wiping with

clean sponge after EACH cleaning.

• Dry with clean, soft cloth or paper towel.

Polishing:

• Place a dab of olive oil onto clean soft cloth. Spread over area until a light sheen is observed. Use

pressure to “work the oil” into the small grooves in the surface. Apply firm, steady pressure using small

circular motions.

> Dry buff: Remove excess oil with clean cloth or paper towel using small circular motions.

> Wet buff: Use an ounce of white vinegar with clean cloth or paper towel using small circular motions.

> Continue wiping until oily finish has been removed.

• Caution! To prevent rust, you MUST rinse with pure hot water from a spray bottle while wiping with

clean sponge after EACH cleaning.

• Dry with clean, soft cloth or paper towel.

Removing Rust:

• If rust has begun to form, there are a variety of products that can treat it.

• Among these are CLR® (calcium, lime and rust remover) and Chemetall Oakite 33 (rust, oxides and

scale remover).

• Caution! To prevent food contamination, personal injury or further corrosion, carefully

observe and follow the rust-removing product’s precautions and instructions.

Bekijk gratis de handleiding van Structural Concepts Grocerant FB4SS-3R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.