Structural Concepts Grocerant FB3SS-2R handleiding

Niet gecategoriseerd

Structural Concepts

27 pagina's

PDF beschikbaar

Handleiding

CaesarStone® Care & Maintenance

TAKING CARE OF YOUR QUARTZ SURFACE

CaesarStone quartz surfaces blend modern sophistication

and timeless luxury with unbeatable strength and

durability. The ever-lasting finish requires only simple and routine care to maintain its good looks.

MINIMAL MAINTENANCE

Virtually maintenance-free, CaesarStone’s hard, non-porous surfaces require no sealing to renew the

luster and are simple to clean. In most cases, dip a clean, soft cloth into a solution of water and soap

(or mild detergent) solution and wipe away dust, smudges and residue; then rinse with clean water to

remove residue. This simple treatment is usually enough to keep your CaesarStone countertop

looking like new. If necessary, use a non-abrasive soft soap along with a non-scratch or delicate

scrub pad. Afterwards, thoroughly rinse with clean water to remove residue.

STUBBORN STAINS OR DRIED SPILLS

If needed, apply a non-abrasive household cleaners (a non-abrasive cleaner will not dull the surface

shine); rinse to remove residue. To remove adhered material such as food, gum, nail polish or even

dried paint, first scrape away excess material with a plastic putty knife and then use a damp cloth to

remove any marks or residual dirt. For extra-stubborn stains, use a no-scratch Scotch-Brite® pad

along with the non-abrasive cleaner recommended by your local CaesarStone® distributor.

HEAT TOLERANCE

CaesarStone is more heat resistant than other stone surfaces including most granite, marble and

limestone; it is not affected by temperatures lower than 300 °F (149 °C). However, like all stone

material, CaesarStone can be damaged by sudden and rapid temperature changes. Therefore, do not

place hot pots or pans directly placed on the surface. Instead place a hot pad or trivet on the surface

under cooking units such as electric frying pans, crock pots, or roaster ovens.

SCRATCH RESISTANT

CaesarStone is a highly scratch resistant surface; however avoid abuse of the surface by refraining

from using sharp objects such as sharp knives or screw drivers directly onto the surface.

CLEANING AGENTS TO AVOID

• It’s important to be aware that like any other surface, CaesarStone can be permanently damaged

if exposed to strong chemicals and solvents that can damage its physical properties.

• Never clean your CaesarStone surface with products that contain Trichlorethane or Methylene

chloride, such as paint removers or strippers.

• Avoid the use of highly aggressive cleaning agents such as oven/grill cleaners and dishwasher

polishing agents that have high alkaline/pH levels (pH 8.5 or higher).

• Products containing oils or powders may leave a residue and should be rinsed off thoroughly.

Should your surface accidentally be exposed to any of these damaging products, rinse

immediately with clean water to neutralize the effect.

CLEANING SCHEDULE: CAESARSTONE® SOLID SURFACE

Bekijk gratis de handleiding van Structural Concepts Grocerant FB3SS-2R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.