Structural Concepts Fusion GMSV4H handleiding

Niet gecategoriseerd

Structural Concepts

20 pagina's

PDF beschikbaar

Handleiding

OVERVIEW

This merchandiser is designed for dry heating operations

throughout the product area. The heat is generated from

electric rod well warmers, overhead ceramic heaters and

overhead ceramic metal halide lamps.

• This merchandiser is designed for display of

perishable, unpackaged heated products.

• This merchandiser IS NOT designed to heat products

up; product must be pre-heated PRIOR to its display.

• Cases should be installed and operated according to

this operating manual’s instructions to ensure proper

performance.

• Improper use will void warranty.

NSF/ANSI TYPE I

This unit is designed for the display of products in ambient

store conditions where temperatures and humidity are

maintained within a specific range.

• Ambient conditions are to be at 55% max. humidity

and maximum temperatures of 75 °F (24 °C).

INTEGRATED AVERAGE PRODUCT TEMPERATURE

• The Structural Concepts® Fusion Service Deli

Merchandisers are designed to merchandise product

at an integrated average product temperature of

150 °Fahrenheit / 66 °Celsius.

COMPLIANCE

• Performance issues when in violation of applicable

NEC, federal, state and local electrical and plumbing

codes are not covered by warranty.

• See below compliance guideline.

WARNINGS

• This page contains important warnings to prevent

injury or death.

• Please read carefully!

PRECAUTIONS and WIRING DIAGRAMS

• See next page for PRECAUTIONS and WIRING

DIAGRAM information.

WARNING

Ceramic Heaters and Ceramic Metal Halide Lamps Are Hot!

Turn Off or Disconnect and Allow to Cool

Before Servicing or Replacing.

WARNING

HOT

SURFACE

COMPLIANCE

This equipment MUST be installed in compliance with

all applicable NEC, federal, state and local

electrical and plumbing codes.

OVERVIEW / TYPE / TEMP / COMPLIANCE / WARNINGS / PRECAUTIONS / WIRING - PAGE 1 of 2

WARNING

Risk of electric shock. Disconnect power before servicing unit.

CAUTION! More than one source of electrical supply is

employed with units that have separate circuits.

Disconnect ALL ELECTRICAL SOURCES before servicing.

WARNING

ELECTRICAL

HAZARD

WARNING

Pans and Wells Are Hot!

Disconnect and allow to cool

before cleaning or removing from case.

WARNING

HOT

SURFACE

Bekijk gratis de handleiding van Structural Concepts Fusion GMSV4H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.