Structural Concepts Fusion GMSSV552R handleiding

Niet gecategoriseerd

Structural Concepts

30 pagina's

PDF beschikbaar

Handleiding

INSTALLATION, CONTINUED: SEALING AND BOLTING UNITS TOGETHER

4. Sealing and Bolting Units Together

Follow these steps to assure a secure, level lineup.

A. Begin all lineup leveling from highest point of

floor.

B. After the ’first’ case is level, check that front and/

or rear doors smoothly open and close.

C. Apply a refrigeration bead of industrial grade

urethane adhesive on non-visible areas (at case

ends) as illustrated below.

D. Line up ‘second’ case bolt-hole to bolt-hole to

‘first’ case.

E. Using SCC-supplied bolts (found in installation

packet or inserted in holes); connection points are

shown with floating arrowheads below ( ). You

may need to remove decking, side covers, ‘perf’

panel, etc. to access certain holes. Insert bolts.

Deck

Approximate hole

locations pointed

at with arrows

( ) for bolting

units together.

Refrigeration Bead

Sanitation

Bead

Refrigeration

Bead

F. Caution! Front of cases MUST be flush with

each other! After leveling, all cases to be same

height.

G. Using SCC-supplied nuts & bolts, lightly tighten

each of the 5 to 8 bolts in a cross-wise pattern.

Work your way around the pattern, tightening

more firmly at each pass. Do not firmly tighten

one bolt and then start on the next!

H. After the cases are bolted together, level the

‘second’ case. Repeat this process for each

case to be adjoined.

I. After all lined-up cases are level, apply a

sanitation bead of industrial grade silicone

sealant (as shown below).

Sanitation Bead

Refrigeration

Bead

Urethane For

Refrigeration Bead

Silicone For

Sanitation Bead

Note: Illustration shown may not

exactly reflect every feature or

option of your particular case.

Bekijk gratis de handleiding van Structural Concepts Fusion GMSSV552R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.