Structural Concepts Fusion GMSS552R handleiding

Niet gecategoriseerd

Structural Concepts

30 pagina's

PDF beschikbaar

Handleiding

TROUBLESHOOTING - GENERAL - PAGE 1 of 2

CONDITION TROUBLESHOOTING

Case Not Lining Up See Installation Section for instructions on properly aligning

case (alongside other cases) and adjusting levelers.

Product is Drying Out Check the relative humidity in the store.

Water Is On The Floor Check that the drain trap is free of debris.

Check that the drain hose is correctly positioned over the floor

drain.

Check store conditions. Conditions should be 55% humidity /

75° Fahrenheit to prevent condensation.

Fan Emits Excessive Noise Check that the case is aligned, level and plumb.

*Check evaporator fan for cleanliness.

*Unplug/power off fan motors. Check motor shaft for excessive

bearing wear.

*Check that fan motors are securely mounted in brackets.

*Verify that fan blades are securely mounted to fan motor.

*Check that nothing is preventing blade rotation.

*Check that the fan shroud is properly secured.

Fans Are Not Working *Check that fans are plugged in at the fan shroud.

*Check for foreign material obstructing fan performance.

*Check that fan blades freely rotate within fan shrouds.

*Check that power is going to fans.

*Check that fan wiring is connected on terminal blocks.

Check that MAIN power switch (if any) is turned on.

*Check if there is ice build up blocking the fan.

System Is Not Operating Check that the utility power is on.

Check the circuit breaker box for tripped circuits.

Check that the MAIN power switch (if any) is turned on.

Check that unit is properly plugged in (self contained units).

*This Service Is To Be Performed By Trained Service Providers Only

Bekijk gratis de handleiding van Structural Concepts Fusion GMSS552R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.