Structural Concepts Fusion GMS4H handleiding

Niet gecategoriseerd

Structural Concepts

19 pagina's

PDF beschikbaar

Handleiding

• As ceramic metal halide lamps may take up to 15

minutes to gain full illumination, turn on lamps

BEFORE loading product into case. This will allow

proper time for proper illumination.

------- ------- ------- ------- -------

• Warning! Disconnect power before providing

maintenance & service to unit. Allow to cool

for at least 15 minutes before accessing.

• After case has been allowed to cool, ceramic

metal halide light fixtures may now be accessed.

• To access light fixtures, unscrew thumbscrews

and lower the light fixture (consisting of metal

housing and glass).

• Then, access lamps for service, removal,

replacement, etc.

OVERHEAD CERAMIC METAL HALIDE LIGHT FIXTURES

Overhead Ceramic Metal Halide Light Fixtures

• Warning! Lamps are NOT manufactured to

resist breakage. Replace with same wattage

ceramic metal halide lamps (similarly

manufactured). If uncertain of wattage, refer to

label near rear sliding doors for specifics.

• Warning! Ceramic heaters also heat up light

fixtures. So check that entire area has been

allowed to cool before touching light fixtures.

• See illustration below for location of overhead

light switch.

• Light switch turns on lamps to entire overhead

section of case.

Overhead Ceramic

Metal Halide Lamps

Ceramic Metal

Halide Lamps

Thumbscrew

Bekijk gratis de handleiding van Structural Concepts Fusion GMS4H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.