Structural Concepts Fusion GMG5 handleiding

Niet gecategoriseerd

Structural Concepts

43 pagina's

PDF beschikbaar

Handleiding

TROUBLESHOOTING - GENERAL ISSUES (PAGE 3 of 3)

CONDITION TROUBLESHOOTING

Case Lights Are Not

Working

Check that light switch is in the ON position.

Check bulbs for proper installation and connection.

Check that light switch (if any) is in the on position.

Check for burned out bulbs. Turn lights off & replace.

Clean dirt and dust from the bulbs to prevent flickering.

Certified electricians only: Check voltage flow at ballasts. If voltage is entering but

not exiting the ballast, ballast is faulty.

>> T-8 fluorescent lights: Check that ALL lights are connected properly and

receptacles capped. See MAINTENANCE FUNDAMENTALS: REAR SLIDING

DOORS / T-8 LIGHT FIXTURES section in manual for illustrations and in-depth

instructions.

>> LED lights: Check that LED lights are connected properly. See

MAINTENANCE FUNDAMENTALS: LED LIGHT FIXTURES section in manual

for illustrations and in-depth instructions.

Bekijk gratis de handleiding van Structural Concepts Fusion GMG5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.