Structural Concepts Fusion GMG4 handleiding
Handleiding
Je bekijkt pagina 22 van 43
22
OPERATION: SELF-CONTAINED MODEL MEAT CASE REAR DRAIN/TEMPERATURE CONTROLLER
1. Rear ‘Ball Valve’ Drain System
Certain Self-Contained Meat units have a drain sys-
tems that routes water to a drain spout (bypassing
evaporator pan) by using a drain ‘ball valve’ handle.
This drain can flow to a bucket, hose or floor drain.
This feature allows more thorough cleaning of tub
area. See CLEANING SCHEDULE TO BE
PERFORMED BY STORE PERSONNEL for
additional instructions on cleaning unit.
• Raised position of drain ‘ball valve’ handle
allows water to flow to internal evaporator pan.
• Lowered position of drain ‘ball valve’ handle
allows water to flow through rear drain spout.
• See illustrations on this page.
• Caution! Make certain you have a bucket or
hose connected to drain (routed to floor
drain) prior to re-routing water flow!
2. Temperature Controller
• The Programmable Controller maintains proper
case temperature.
• See PROGRAMMABLE CONTROLLER section
in this manual for specifics.
Note: View of model shown below is partially
disassembled for illustrative purposes only.
Main Power
Switch
OFF
ON
--- Sample Programmable Controller ---
Refrigeration
Package
(at Case
Underside)
Drain ‘Ball’
Valve Handle
at Lowered
Position
(Water Flows
through Drain
Spout)
Drain Spout
Rear Panel (May Be
Lifted Up & Off
Drain
Spout
Drain ‘Ball’ Valve Handle at Raised Position
(Water Flows To Internal Evaporator Pan)
--- Model GMG6 Shown Above ---
Bekijk gratis de handleiding van Structural Concepts Fusion GMG4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Structural Concepts |
| Model | Fusion GMG4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17753 MB |
