Structural Concepts Fusion GMG10 handleiding

Niet gecategoriseerd

Structural Concepts

43 pagina's

PDF beschikbaar

Handleiding

INST & OPER MANUAL / APPROVALS, ROUTINGS, REVISIONS

REV. DATE BY REVISION(S)

A 8.3.2010 BRO RELEASE FOR PRODUCTION. Used P/N 63293 Meat/Seafood Gravity Coil Operating Manual as

template. P/N 5-0173 was that manual’s corresponding G-Series Installation Sheet.

B 1.20.2011 BRO Added model GMG 6 (self-contained unit) to operating manual, its rear drain configuration & Carel

Controller. All others are remotes. Added adverse conditions/spacing issues warning.

C 3.25.2011 BRO Added full length GMG12 (rather than two GMG6's adjoined) to manual. Added cautionary note (in

Installation Section) to check proper drainage.

D 11.30.2011 BRO Added matting and updated overview and warnings sheet. Added exploded view of refrigeration

package (on self-contained units only).

E 6.27.2013 BRO Added GMG12 Hybrid Meat Case (With Shelf and Gravity Coil and Evaporator Coil). Limited War-

ranty was “Warranty Information Sheet”. GFCI now mandated.

F 12.20.2013 BRO Added proper hybrid blower gravity coil illustrations.

G 5.5.2015 BRO Added Model GMG8.6552. Revised O/W Sheet and Warranty Sheet. Revised cleaning process (per

Jon Murray due to trip to Mehmert's Green's Grocery Café in 3/2015. Added Model GMGX4 to

Manual (cover and internal illustrated parts breakdown); also mentioned optional misting system.

H 5.22.2015 BRO Specified that upper refrigeration system/gravity coil drip tray assembly is to be thoroughly cleaned

and defrosted at least weekly.

I 5.26.2016 BRO Unspecified revisions.

J 10.1.2016 BRO Added Model GMGV12 (Vertical Glass) to cover; Revised to show both LEDs & fluorescent, etc. Showed vertically

adjustable rear ledge / rear cutting board. Showed optional paper roller. Revised warranty sheet. Replaced existing

bolting/caulking instruction side view (inapplicable model) with model GMG4. Added second bolting/caulking instruction

sheet with new vertical model (GMGV12).

K 12.1.2016 BRO Added Model GMG4.6552.

L 1.29.2020 BRO Added Model GMGV4 to manual. Added CA Prop 86 and CA-Mandated RDS information. Revised Warranty Sheet and

Carel Thermostat Controller Documentation. Revised LED Light Sheet to show latest designs.

M 10/27/22 CTG

REVISED O/W SHEET INFO, SERIAL LABEL, SCC LOGO, PRODUCT FAMILY LOGO & FILE NAME. REPLACED CON-

TROLLER AND WARRANTY SHEET INFO W/SINGLE SHEETS (WITH QR CODES) PER QR CODE IMPLEMENTATION

PROTOCOL.

N 7/6/2023 BRO

ADDED "...FRESH. ALWAYS," LOGO TAGLINE. TYPE II COND NOW 55%RH. TECH SVC HRS NOW 8 TO 8. REMOVED

COVER SHT SPECKLES.

REVISIONS

ROUTED TO: DEPARTMENT INITIALS SIGNOFF DATE COMMENTS

BERT OGBORN TECHNICAL WRITER BRO

07/06/2023

KARL ROSENCRANTS PROJECT MANAGER

JASON PAQUETTE REFRIGERATION ENG.

JIM ARCHBOLD ELECTRICAL ENGINEER

JON MURRAY REFRIGERATION

WHOMEVER PROD. MANAGEMENT

ROUTINGS / SIGNOFF

L:\Inst & Oper Man\Encore\HV(L)RSS Oper Man 99652.pub

5-4467

Bekijk gratis de handleiding van Structural Concepts Fusion GMG10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.