Structural Concepts Fusion GMDSV4D handleiding

Niet gecategoriseerd

Structural Concepts

35 pagina's

PDF beschikbaar

Handleiding

INSTALLATION: REMOVAL FROM SKID, REMOVING LOWER FRONT PANELS

1. Remove Case From Skid

• Remove shipping brace that may be

securing case to skid.

• Support case to prevent tipping.

• Caution! Rails can be damaged if case hits

floor with heavy force!

Case can be repositioned with pallet truck when

front lower panel is removed. Blocking may be

necessary to obtain adequate height.

Slide Skid Out

• Carefully slide unit to

rear of skid and tip

backward off skid.

• Illustration may not

reflect every feature

or option of your

particular case.

2. Remove Case From Skid (Casters)

Remove shipping brackets that may be securing

casters to skid

• Place ramp up against skid (to allow case to

smoothly slide off from skid).

• Maintain support of case at all times or center

of gravity may cause case to fall.

• Unlock Casters. Roll unit to rear of skid.

Ramp

Roll down ramp

and off from skid.

Support

while

rolling

case

down

ramp.

Note: Illustrations

shown reflect a

general outline of

sample cases and do

not reflect features or

options of your

particular model.

3. Removing Vertical Lower Front Panel (and Rear Panel)

Removing Lower Front Panel

• No screw removal is required to remove lower front panel.

• Simply lift lower front panel slots up and off case hooks.

• Replace in same manner it was removed.

• Rear panel is removable in same manner.

• Note: Illustrations below may not exactly reflect every

feature or option of your particular case.

Lower Front Panel

(Reversed to Show Slots

Hooks

Slots

Bekijk gratis de handleiding van Structural Concepts Fusion GMDSV4D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.