Structural Concepts Fusion GMDS4R handleiding

Niet gecategoriseerd

Structural Concepts

32 pagina's

PDF beschikbaar

Handleiding

Fusion® User Manual 18

Cleaning

The exterior stainless steel and Controller Boxes can be gently wiped with a moist cloth. Please be careful not to damage

the tip of the nebulizer The nebulizer tip can be cleaned every 6 months with a Q-tip dipped in CLR scale remover.

GENTLY rub the surface of each nebulizer with Q-tip for a few seconds. No further cleaning is required.

Troubleshooting

System won’t run when turned on:

• Make sure the controller is plugged in and turned on.

• Receptacle voltage may be incorrect.

• Water may be turned off. Verify all shutoff valves are open, keep power off while verifying.

• Verify all controller connections are made.

System is running but not humidifying:

• Make sure the water supply is on.

• Check water pressure, increase if water is dripping from nozzle decrease pressure.

• Check for debris in the water line to nozzle.

System is not humidifying well:

• Check water pressure.

• Check water lters.

Atmosphere Cleaning and Maintenance

Bekijk gratis de handleiding van Structural Concepts Fusion GMDS4R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.