Structural Concepts Fusion GLDSV5R handleiding

Niet gecategoriseerd

Structural Concepts

37 pagina's

PDF beschikbaar

Handleiding

CLEANING SCHEDULE - EXTERIOR: TO BE PERFORMED BY STORE PERSONNEL

AREA FREQ. INSTRUCTIONS

Exterior Daily All Glass / Mirrors: Clean side glass, front glass and mirrors with household or

commercial glass cleaner. Clean out door track with moist cloth.

Daily Rear Sliding Door Exterior Glass: Clean with household or commercial glass

cleaner.

Daily End Panels, Front Panel, Toe-Kick, etc.: Wipe off all surfaces with warm water

and mild soap solution and non-abrasive cloth.

Weekly Wood, Laminate and Painted Surfaces: Clean with mild soap and water solution

and a soft cloth .

Weekly Magnetic Condenser Coil Filter (Self-Contained Units Only):

 This filter helps prevent dust particles from entering condenser coil.

 It is usually accessible at case rear.

 Clean magnetic condenser coil filter by following either step 1 or 2; then

follow step 3:

1. To clean by hand, (without using dishwasher), remove magnetic condenser

coil filter from case. Use a rag or soft-bristled brush to wipe off excess dust

particles from filter. Submerse in warm, soapy water. Use soft-bristled brush

to remove dust, dirt, grease and grime that may collect on filter. Rinse

thoroughly. Skip to step #3.

2. As magnetic condenser coil filter is dishwasher safe, remove from case

(no screw removal required) and use a rag or soft-bristled brush to wipe off

excess dust particles from filter. Run in normal dishwasher cycle. Remove

from dishwasher. Go to next step.

3. Dry with soft cloth or paper towel (as shown below) or allow to air dry.

Replace.

Monthly Under Case Cleaning: Remove front toe-kick (or rear panel). Vacuum under case

to remove all dust and dirt. Replace front toe-kick (or rear grille) when complete.

Bekijk gratis de handleiding van Structural Concepts Fusion GLDSV5R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.