Structural Concepts Fusion GLDSV5R handleiding

37 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 12 van 37
12
INSTALLATION, CONTD: SCALE STAND WITH OUTLETS & CAT5 / FLIP-UP LEDGE
—— Optional Rear Ledge Removal Steps ——
Note: For clarity, only Shelf Track is shown being
removed. Rear Ledge is attached to Shelf Track.
Hinged
Support
Bracket
Shelf
Track
-1- -2- -3-
-4-
Hinged
Support
Bracket
12. Scale Stand / Ethernet CAT5 / Receptacle
Optional scale stand location and illustration is
shown below.
Route the scale stand cord through into
receptacle (shown below).
Plug scale stand cord into receptacle as shown
in illustration below.
Depending upon options chosen, CAT5
(Category 5) network cable outlet may also be
available at scale stand base (as shown below).
13. Rear Ledge
Rear Ledge is connected to Shelf Track. See below
for Rear Ledge removal steps.
Rear ledge step-by-step removal method is as follows:
1. Hinged Support Bracket is shown in its standard
upright position.
2 & 3. While upright, Rear Ledge must be
slid away from case and then rotated downward to
vertical position.
3 & 4. From the shelfs lowered position, lift from
bottom edge upward to disengage shelf track (and
attached Rear Ledge) from bracket.
Note: Illustrations shown may not exactly reflect every
feature or option of your particular case.
Sanalite® Flip-Down
Ledge
Scale Stand
Ethernet CAT5
110V Electrical Outlets
Note: Illustration shown may not
exactly reflect every feature or
option of your particular unit.

Bekijk gratis de handleiding van Structural Concepts Fusion GLDSV5R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkStructural Concepts
ModelFusion GLDSV5R
CategorieNiet gecategoriseerd
TaalNederlands
Grootte11903 MB