Structural Concepts Fusion GLDSS443R handleiding

Niet gecategoriseerd

Structural Concepts

38 pagina's

PDF beschikbaar

Handleiding

I:\Oper Manuals\Specialty\Butcher Block Cleaning 20-02296.pub

1. Dishwashing Liquid

2. Clean Sponge / Cotton Cloth / Paper Towel

3. Non-Toxic Wood Oil or Cream

888 E. Porter Road ∙ Muskegon, MI 49441 Phone: 231.798.8888 Fax: 231.798.4960 www.structuralconcepts.com

--- Recommended Cleaning Supplies ---

4. Bleach (Optional)

5. Lemon Juice (Optional)

6. Steel Wool or Sandpaper (Optional)

Please Follow These Instructions To Properly Clean

and Care for Your Butcher Block Surface

1. Wash the countertop with mild soap and water. Regular liquid dish washing

detergent works well. As little as 2 to 3 drops of liquid dish soap to a quart of warm

water is sufficient. Use a clean sponge or dish towel to clean surface. Caution!

Never use an abrasive cleaning solution on ANY wood countertop!

2. Kill bacteria (often left behind by raw meat), with bleach. Add one

tablespoon of bleach into one gallon of warm water. Do not use a

higher concentration of bleach or wood will crack. Immediately rinse the

countertop with this solution to kill any bacteria. This will help prevent

food borne illnesses.

3. Remove tough stains from butcher block by pouring lemon juice on

the surface and letting it soak for several seconds.

4. Dry the butcher block surface with a soft cloth immediately after

cleaning. Do not allow standing water or moist surfaces to remain on

the butcher block. Also, use the soft cloth to dry moist or wet crevices

so that no moisture remains.

5. Varnished countertops do not need oil treatments. Just follow

steps 1 through 4 above for varnished countertops. Maintain

unvarnished surfaces with a non-toxic oil or warm mineral oil

treatments on a weekly basis or whenever you notice the wood drying

or color fading. Ironwood® Gourmet Butcher Block Oil (shown at left)

is food safe. Do not use vegetable oil or sunflower seed oil as the oil

will become rancid and leave odor. Apply mineral oil to the butcher block surface

in thin coats. Allow the oil to permeate the surface for as little as 5 minutes and

as long as six (6) hours. Blot excess oil off the countertop with a soft cloth. Wipe

away the remainder with a paper towel or cotton cloth. Wait 12 hours before

using the counter.

6. Stains on butcher block can be removed with steel wool or sandpaper. Rub on

the surface until stains disappear. Then, coat the surface with mineral oil (see

#5 for instructions).

7. Always use a plastic or metal cutting board on a wood surface

when cutting. Cutting directly

on the butcher block will leave

behind knife marks that will be

difficult to clean or repair.

BUTCHER BLOCK CLEANING INSTRUCTIONS (TO BE PERFORMED BY STORE PERSONNEL)

Butcher Block Cleaning Instructions

Bekijk gratis de handleiding van Structural Concepts Fusion GLDSS443R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.