Structural Concepts Fusion GLDSS443R handleiding

Niet gecategoriseerd

Structural Concepts

38 pagina's

PDF beschikbaar

Handleiding

1. Evaporator Fans, TXV and Drain Access

• Caution! Turn Main Power off and disconnect

from outside power source.

• Remove decking and sub-deck.

• Perform maintenance, service or cleaning as

required.

• Return decking and sub-deck to unit in reverse

order in which they were removed.

2. Evaporator Coil Fan Discharge

When main power switch is on, refrigeration

assembly will energize (see START-UP AND

OPERATION section in this operating manual.

• Coil fans should turn on. From inside of the case,

check for discharge air from front baffle, to

confirm that the fans are functioning properly.

Drain

Evaporator

Coil Fan

TXV

MAINTENANCE FUNDAMENTALS: EVAP. FANS, TXV, DRAIN ACCESS, RISERS (AKA “STEPS”)

Note: Illustrations shown

may not exactly reflect

every feature or option of

your particular case.

• When the case is in a start up mode or has been

idle for a long period of time, the unit will require

75 minutes of run time to pull-down temperature.

3. Risers (aka “Steps”)

• Risers (“steps”) allow product to be more

prominently displayed.

• Risers are to rest on decks and be placed as far

back as possible (up against rear plenum).

• See CLEANING SCHEDULE (TO BE

PERFORMED BY STORE PERSONNEL) in

manual for instructions on cleaning risers/steps.

Model GLDSS6R.5322 (With Steps) Shown Above

Rear Plenum

Risers (aka “Steps”)

Bekijk gratis de handleiding van Structural Concepts Fusion GLDSS443R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.