Structural Concepts Fusion GLDSS1243R handleiding

Niet gecategoriseerd

Structural Concepts

38 pagina's

PDF beschikbaar

Handleiding

START-UP AND OPERATION

1. Merchandiser Refrigeration Assembly Pan

Slide-Out Feature

• Retaining screws must be removed to allow

refrigeration assembly to be slid out (for servicing

and/or cleaning).

• See illustration at top-right.

• Note: Two addition screws must be removed from

top of rails for pan to slide out allowing refrigeration

assembly access. See illustration at mid-right.

2. Merchandiser Start-Up - Refrigeration

• Self-Contained Only: Before turning on Main Power

switch, remove front panel (by lifting up and off; no

screw removal required).

• Caution! Check that the condensate pan is

positioned directly under the drain BEFORE turning

on Main Power!

• Return front panel to the case in same manner it

was removed. See below illustration.

3. Merchandiser Start-Up - Electrical

• Remote Units: Case is hard-wired. When power is

supplied, case will power-up.

• Self-Contained: Main Power switch is located at

case rear-right. See illustration at top right (rear

panel is removed to show main power switch and

temperature controller).

• Rear panel is designed to be lifted up and off without

screws.

Refrigeration Assembly Pan

Retaining Screws

Temperature

Controller

Front Panel (Lift Up

and Off). No Screw

Removal Required

Condensate Pan

(Electric Coil Evap-

oration Units)

Refrigeration

Package

Main Power Switch

(Self-Contained Only)

Two additional

screws must be

removed from

top of rails for

pan to slide out.

View of Case Front

Note: Illustrations

shown may not exactly

reflect every feature

or option of your

particular case.

Bekijk gratis de handleiding van Structural Concepts Fusion GLDSS1243R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.