Structural Concepts Fusion GJDSS4RLB handleiding

Niet gecategoriseerd

Structural Concepts

25 pagina's

PDF beschikbaar

Handleiding

WARNING

HOT

SURFACE

OVERVIEW

• These Structural Concepts cases are designed to

merchandise packaged products at 38 °F (3 °C) or less

product temperatures (unless custom cases with wire

rack shelving).

• Product must be pre-chilled to 38 °F (3°C) or less before

being placed in merchandiser.

• Cases should be installed and operated according to this

operating manual’s instructions to ensure proper

performance. Improper use will void warranty.

NSF/ANSI TYPE I vs. II ENVIRONMENTAL CONDITIONS

This unit is designed for the display of products in ambient

environmental conditions where temperatures and relative

humidity are maintained within a specific range.

•

NSF/ANSI Type I Conditions: Product is displayed in

store conditions with maximum ambient temperature of

75 °F (24 °C) and relative humidity of 55%.

•

NSF/ANSI Type II Conditions: Product is displayed in

store conditions with maximum ambient temperature of

80 °F (27 °C) and maximum relative humidity of 55%.

• If you are unsure if your unit is classified as NSF/ANSI

Type I or Type II, see tag next to serial label on your case.

COMPLIANCE

• Performance issues when in violation of applicable

NEC, federal, state and local electrical and plumbing

codes are not covered by warranty.

• See below compliance guideline.

WARNINGS

• This page contains important warnings to prevent injury or

death. Please read carefully!

PRECAUTIONS and WIRING DIAGRAMS

• See next page for PRECAUTIONS and WIRING

DIAGRAM information.

WARNING

Hazardous moving parts. Do not operate unit with covers removed.

Fan blades may be exposed when deck panel is removed.

Disconnect power before removing deck panel.

WARNING

Risk of electric shock. Disconnect power before servicing unit.

CAUTION! More than one source of electrical supply is

employed with units that have separate circuits.

Disconnect ALL ELECTRICAL SOURCES before servicing.

WARNING

ELECTRICAL

HAZARD

WARNING

KEEP

HANDS

CLEAR

COMPLIANCE

This equipment MUST be installed in compliance with

all applicable NEC, federal, state and local

electrical and plumbing codes.

OVERVIEW / TYPE / COMPLIANCE / WARNINGS / PRECAUTIONS / CORDS / WIRING - PAGE 1 of 2

WARNING

This product can expose you to chemicals, including

Urethane (Ethyl Carbamate), which are known to the state of

California to cause cancer and birth defects or other reproductive

harm. For more information go to P65Warnings.ca.gov.

WARNING

Condensate pan and overflow condensate pans are HOT!

Disconnect and allow to cool before cleaning or removing from case.

Bekijk gratis de handleiding van Structural Concepts Fusion GJDSS4RLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.