Structural Concepts Fusion GJDSS4RLB handleiding

Niet gecategoriseerd

Structural Concepts

25 pagina's

PDF beschikbaar

Handleiding

CONDITION TROUBLESHOOTING

Case Not Lining Up See INSTALLATION section in manual for instructions on properly aligning case

(alongside other cases) and adjusting levelers.

Water Is On The Floor Caution! Water on flooring can cause much damage! Until cause is determined

(and repaired), following these procedures:

• Use wet-dry vacuum (or mop & bucket) to remove standing water.

• Use ‘catch pans’ for water to drain into. Swap out regularly until case has

completely drained.

Check that the drain trap is free of debris.

Check that the drain hose is correctly positioned over floor drain.

Check store conditions.

• To prevent condensation in NSF/ANSI Type I environments, maximum

conditions are to be 55% relative humidity / 75° Fahrenheit.

• For NSF/ANSI Type II environments, maximum conditions are to be 55%

relative humidity / 80° Fahrenheit.

• If you are unsure if your unit is classified as NSF/ANSI Type I or Type II, see

tag next to serial label on your case.

Fan Emits Excessive

Noise

Check that the case is aligned, level and plumb.

Check evaporator fans for cleanliness.

Check fan motors for bearing wear.

Check that fan motors are securely mounted in brackets.

Check that nothing is preventing blade rotation.

Check that the fan shroud is properly secured.

Fans Are Not Working Check for foreign material obstructing fan performance.

Check that fan blades freely rotate within fan shrouds

Check that power is going to fans

Check that fan wiring is connected on terminal blocks.

Digital Control Display

Is Blank

Check the circuit breaker box for tripped circuits.

System Not Operating Check that the utility power is on.

Check the circuit breaker box for tripped circuits.

TROUBLESHOOTING (TO BE PERFORMED BY TRAINED SERVICE PROVIDERS ONLY) - PAGE 1 of 2

Bekijk gratis de handleiding van Structural Concepts Fusion GJDSS4RLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.