Structural Concepts Fusion GHSV852RLB handleiding

Niet gecategoriseerd

Structural Concepts

26 pagina's

PDF beschikbaar

Handleiding

CONDITION TROUBLESHOOTING

Case Not Lining

See INSTALLATION section in this manual for instructions on properly aligning case

(alongside other cases) and adjusting levelers.

Water Is On The

Floor

Caution! Water on flooring can cause much damage! Until cause is determined (and

repaired), following these procedures:

• Use wet-dry vacuum (or mop & bucket) to remove standing water.

• Use ‘catch pans’ for water to drain into. Swap out regularly until case has

completely drained.

Note: See Drain, Hose and Bracket Placement Illustrations sheet in this manual for

views of different condensate systems used in display cases.

Check that the drain trap is free of debris.

Check that the drain hose is correctly positioned over condensate pan (or floor drain,

for remote units).

Check store conditions.

• To prevent condensation in NSF/ANSI Type I environments, maximum conditions

are to be 55% relative humidity / 75° Fahrenheit.

• For NSF/ANSI Type II environments, maximum conditions are to be 55% relative

humidity / 80° Fahrenheit.

• If you are unsure if your unit is classified as NSF/ANSI Type I or Type II, see tag

next to serial label on your case.

TROUBLESHOOTING (TO BE PERFORMED BY TRAINED SERVICE PROVIDERS ONLY) - PAGE 1 of 3

Bekijk gratis de handleiding van Structural Concepts Fusion GHSV852RLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.