Structural Concepts Fusion GHSV652RLB handleiding

Niet gecategoriseerd

Structural Concepts

26 pagina's

PDF beschikbaar

Handleiding

MAINTENANCE, CONT’D: REAR SLIDING DOORS / THERMOMETER

3. Rear Sliding Doors

Note: Doors are not interchangeable. There is an

inner and outer door.

• The outer door is the right hand door (from the

service side or rear of case).

• It is identified by a stop located at the lower right

hand corner to the inside of the case.

• To remove, move doors toward the center of the

case.

• Outer door must be removed first and replaced

last.

• Individually lift each door up toward the top of the

case; pivot the bottom of the door out.

• Carefully set rear sliding doors down to prevent

them from falling.

• Replace rear sliding doors in reverse order they

were removed.

4. Thermometer (Placement and Function)

• Thermometers are found at varying locations.

Illustration below shows rear-center placement.

Yours may vary.

• Thermometers provided with equipment reflect

internal air temperature only (NOT actual food

temperature).

• Use probe thermometers to determine actual

product temperatures.

Thermometer

Bekijk gratis de handleiding van Structural Concepts Fusion GHSV652RLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.