Structural Concepts Fusion GHSS1256RLB handleiding

Niet gecategoriseerd

Structural Concepts

37 pagina's

PDF beschikbaar

Handleiding

INSTALLATION, CONT’D: CASTER STYLES / LOCKING & UNLOCKING / RAISING & LOWERING

Caster Styles - Overview

>> Structural Concepts utilizes two (2) different caster

styles on its merchandisers.

>> Both caster styles are illustrated on this page.

13. Caster Style “A” - Locking/Unlocking Only

• Caster Style “A” is shown at top right on this page.

• Case must be level and plumb before locking;

levelers are usually adjusted to do so; see previous

page for leveler adjustment instructions..

• Caster assembly Style “A” is identified as having a

“front” and “rear” for these instructions.

• To lock caster, press down caster lever at “rear.”

• To unlock caster, press down caster lever at “front.”

• This style of caster cannot be raised or lowered.

14A. Caster Style “B” - Locking/Unlocking

• Style “B” casters are unlocked at shipment

(as casters are held in place by wooden

blocks and metal brackets).

• Style “B” casters are in unlocked position;

caster levers will be parallel to floor.

• After case has been moved into position,

casters may be locked. To do so, press

downward against the “ON” marking on the

caster lever.

• To unlock casters (and move case to a

different location), press downward against

the “OFF” marking on the caster lever.

Casters will now be unlocked, allowing the

case to be moved.

• See caster/lever illustrations at lower right for

specifics.

14B. Caster Style “B” - Raising/Lowering

• Style “B” vertical height adjustment ring

illustrations are shown at mid and lower right on

this page.

• Style “B” caster are utilized in lieu of levelers.

• Cases are shipped from factory with Style “B”

casters RAISED to maximum height; this position

aids in skid removal.

• After case has been moved into position, Caster

Style “B” allows vertical adjustment of case so it

may be adjusted until case is level and plumb.

• Slotted head screws MAY be tightened/loosened to

lock vertical height adjustment ring; usually, these

Slotted head screws are NOT tightened at factory.

• After case is level and plumb (as described on

previous page), must may be locked.

Caster

Vertical Height

Adjustment Ring

Caster Style B - Raising/Lowering

Locked

Caster Style A - Locking/Unlocking

Front of Caster

Assembly

Unlocked

Rear of Caster

Assembly

Caster Lever

Caster May Be Locked By

Pressing Downward

Against The ON Lever).

Caster Style B - Locking/Unlocking

Caster Lever Is Shown

In Unlocked Position.

Slotted Head Set

Screws May Be

Tightened When

Desired Vertical

Height Is Achieved)

Bekijk gratis de handleiding van Structural Concepts Fusion GHSS1256RLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.