Structural Concepts Fusion GHSS1252RLB handleiding

Niet gecategoriseerd

Structural Concepts

37 pagina's

PDF beschikbaar

Handleiding

Note: See INSTALLATION section in manual for:

• Front Panel adjustment and removal

• Angled Base adjustment and removal

• Vertical Base adjustment and removal

1. Fluorescent Light Fixtures

Warning! Disconnect power before providing

maintenance and service to unit.

Caution: Lamps have been treated to resist

breakage and must be replaced with similarly

treated lamps.

Note: Warranty will be void if claims arise from

negligence, misuse of goods, extreme

environmental conditions or improper

maintenance. See Overview And Warnings

section in this operating manual.

• Light fixtures are located on underside of shelf

assemblies and at the top inside of case.

• See illustration at top-right for locations.

Removal of lamp:

• Rotate lamp (1/4-turn) either direction to disengage

(upper or lower) pins/contacts from lamp-mounting

sockets.

• Remove bulb by applying even pressure from back

side at the bulb ends and pulling the remaining

contact from sockets.

• See illustrations at mid and lower-right.

Installation of lamp:

• Align pins with slot.

• Insert pins into socket by rotating the bulb 1/4-turn

to secure either the (upper or lower) pin contacts

into the sockets.

• Rotate remaining bulb contacts (1/4-turn) into

remaining lamp mounting socket contacts.

• See illustrations at right.

See next page for LED Light Fixture information

MAINTENANCE: FLUORESCENT LIGHT FIXTURES / REMOVAL & REPLACEMENT

Lamp Pins

Light Socket

Light Fixture

Fluorescent

Light

Fixtures

Above illustration has end panel removed

for illustrative purposes only.

Bekijk gratis de handleiding van Structural Concepts Fusion GHSS1252RLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.