Structural Concepts Fusion GHS556RLB handleiding

Niet gecategoriseerd

Structural Concepts

36 pagina's

PDF beschikbaar

Handleiding

OVERVIEW / TYPE / COMPLIANCE / WARNINGS / PRECAUTIONS / WIRING / PLUGS - PAGE 2 of 2

PRECAUTIONS

• Following are important precautions to prevent

damage to unit or merchandise. Please read carefully!

WIRING DIAGRAM

• Case’s wiring diagram folded and in its own packet.

• Wiring diagram placement may vary; it may be placed

near ballast box, field wiring box, raceway cover, or

other related location.

REFRIGERANT DISCLOSURE STATEMENT

• This equipment is prohibited from use in California

with any refrigerants on the “List of Prohibited

Substances” for that specific end-use, in accordance

with California Code of Regulations, title 17, section

95374.

• This disclosure statement has been reviewed and

approved by Structural Concepts and Structural

Concepts attests, under penalty of perjury, that these

statements are true and accurate.

CAUTION! GFCI BREAKER USE REQUIREMENT

If N.E.C. (National Electric Code) or your local code

requires GFCI (Ground Fault Circuit Interrupter) protection,

you MUST use a GFCI breaker in lieu of a GFCI receptacle.

CAUTION! LAMP REPLACEMENT GUIDELINES

LED lamps reflect specific size, shape and overall design.

Any replacements must meet factory specifications.

Fluorescent lamps have been treated to resist breakage

and must be replaced with similarly treated lamps.

CAUTION

CAUTION! POWER CORD AND PLUG MAINTENANCE

Risk of electric shock. If cord or plug becomes damaged,

replace only with cord and plug of same type.

CAUTION! CHECK CONDENSATE PAN POSITION & PLUG

Water on flooring can cause extensive damage!

Before powering up unit, check that:

• Condensate pan is DIRECTLY UNDER condensate drain.

• Condensate overflow pan is connected and operational.

• Condensate pan plug is securely plugged into receptacle.

CAUTION! ADVERSE CONDITIONS / SPACING ISSUES

• Performance issues caused by adverse conditions are NOT warranted.

• Keep end panels tightly joined or at least 6” away from structures to prevent

condensation. Keep rear panel at least 6” from wall/structure.

• Unit must be kept at least 15-feet from exterior doors, overhead HVAC

vents or any air curtain disruption to maintain proper temperatures.

• Unit must not be exposed to direct sunlight or any heat source.

• Self-contained unit clearance: 6” min. air intake / 6” min. air discharge.

CAUTION

SEAL FLOOR-MOUNTED UNITS TO FLOOR

Thoroughly clean floor to assure a secure seal! Fixed (non-removable) base frames, cladding or panels

must be sealed to floor with silicone that meets or exceed food grade NSF/ANSI Standard 51.

Bekijk gratis de handleiding van Structural Concepts Fusion GHS556RLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.