Structural Concepts Fusion GHS556RLB handleiding

Niet gecategoriseerd

Structural Concepts

36 pagina's

PDF beschikbaar

Handleiding

PREVENTIVE MAINTENANCE (TO BE PERFORMED BY TRAINED SERVICE PROVIDER)

PREVENTIVE

MAINTENANCE

FREQ. INSTRUCTIONS

Case Exterior Quarterly Condensing Coil:

• Remove panel to access area by lifting up and off or by screw removal

(depending on case).

• Use air pressure or industrial strength vacuum; clean dust and dirt that

may collect on the Condenser Coil.

• Caution! Airborne dust can contaminating food! Use wet rags to

cover area where air pressure is blowing.

• Warning! Coil fins are sharp. Handle with care!

• Return panel to case.

Quarterly Refrigeration Package/Compressor Area: Caution! Be certain to

disconnect power from case before cleaning Refrigeration Package!

• Warning! Condensate Pan Is HOT! Disconnect power from case and

allow to cool before cleaning condensate pan!

• Slide/Roll compressor package out from under case.

• See REFRIGERATION FUNDAMENTALS section for in-depth

instructions on accessing the condensate pan.

• Use a scrub-brush and a non-corrosive de-scaling solution (to prevent

corrosion, lime and rust). Follow instructions as to proper dilution,

safety precautions and scrubbing method.

• Electric heater coil condensate pans can be removed and cleaned.

• After thoroughly cleaning pan with scrub-brush and solution, rinse

thoroughly with clean water (in spray bottle) and wipe dry with sponge

or paper towel.

• Use moist cloth to wipe off dust & debris that collects on various parts

(fans, sight glass, overflow pan, etc.).

• Slide refrigeration assembly back under case.

• Replace front panel and lower grille via hooks (no screws required).

Quarterly Under Case Cleaning: Once refrigeration package is clear of unit, vacuum

under case to remove dust and dirt that may collect under case.

Case Interior Quarterly Tub Area (Evaporator Coil, Drain, Fans, Brackets):

Caution! Disconnect power from the case before cleaning tub, coil,

fan, motor and drain area!

• Use vacuum to clean entire area.

• After vacuuming, clean area with warm water, clean cloth, and mild

soap solution.

• Remove any debris that may clog drain.

• Wipe down fan blades, motors and brackets with moist cloth.

WARNING! TURN OFF CASE BEFORE PERFORMING PREVENTIVE MAINTENANCE!

Bekijk gratis de handleiding van Structural Concepts Fusion GHS556RLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.