Structural Concepts Fusion GHS456RLB handleiding

Niet gecategoriseerd

Structural Concepts

36 pagina's

PDF beschikbaar

Handleiding

INSTALLATION: GLASS SHELVING / ELECTRICAL LAYOUT / BALLAST / OPT’L LED DRIVER BOX)

LED

Driver

(Optional)

Terminal

Strip

Fluorescent

Light Ballasts

Wire Route PBV

Ballast Box /

LED Driver Box

Note: Illustration below may not

exactly reflect every feature or

option of your particular case.

6. Glass Shelving

Certain models have glass shelving. Glass shelving

will be packed separately for shipment.

• Caution! Carefully remove from packaging.

• Grasp firmly and carefully install.

• Caution! Check that plastic edging is intact

before placing glass shelving onto brackets!

• Plastic edging must NOT be removed from glass

shelves. Contact Structural Concepts for

replacement edging (see TECHNICAL SERVICE

CONTACT INFORMATION section).

• Check that glass shelving is in proper position

before placing product in case.

• See illustrations at right showing both curved and

flat front glass (optional).

7. Electrical Layout

Front Ballast Box or LED Drive Box (Optional)

Remove front panel. See INSTALLATION:

REMOVAL FROM SKID, REMOVING VERTICAL

LOWER FRONT PANELS section in this manual.

• Stub-up connections are in ballast box.

• Remove ballast box / LED driver box cover.

• Knockouts are on the underside of ballast box /

LED driver box making electrical connections.

• Voltage rating is on serial label at case rear.

• Note: Wiring process must be performed by

certified electrician only.

Glass

Shelves

Glass

Shelves

Glass Shelves

Bekijk gratis de handleiding van Structural Concepts Fusion GHS456RLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.