Structural Concepts Fusion GHS456R handleiding

Niet gecategoriseerd

Structural Concepts

32 pagina's

PDF beschikbaar

Handleiding

Fusion® User Manual 17

Start Up

After the system is plumbed turn on the water to the system. There must be water up to the solenoid before the control

box is powered on. Failure to do this could damage the system causing a need for a full replacement. To turn on the

Atmosphere system you need to switch the ON/OFF toggle located on the bottom of the control box.

Upon initial start-up, it will take 5 to 10 minutes to purge air from the water lines. After the air is purged, the nozzle vapor

will be steady uninterrupted. The regulator has been preset to the intended working pressure of the system.

Atmosphere System Requirements and

Operation

Control Box

Power Switch

Operating

The system just needs to be powered on with water owing. The system has been factory set to the optimal duty cycle.

Below is a photo of the system operating. Visual impact should be similar.

Shutting Down

Turn off the power switch and shut off the water running to the system. Typically, with a shutoff valve upline from the

regulator.

Bekijk gratis de handleiding van Structural Concepts Fusion GHS456R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.