Structural Concepts Fusion GHS1052RLB handleiding

Niet gecategoriseerd

Structural Concepts

36 pagina's

PDF beschikbaar

Handleiding

INSTALLATION: REMOVAL FROM SKID, REMOVING VERTICAL LOWER FRONT PANELS

1. Remove From Skid (Rails or Levelers)

• Remove shipping brace that may be securing

case to skid.

• Support case to prevent tipping.

• Caution! Frame Support Rails (or levelers) can

be damaged if case hits floor with heavy force!

Note: Case can be repositioned with pallet truck

when front lower panel is removed. Blocking

may be necessary to obtain adequate height.

Slide Skid Out

• Carefully slide unit to

rear of skid and tip

backward off skid.

• Illustration may not

reflect every feature

or option of your

particular case.

2. Remove Case From Skid (Casters)

Remove shipping brackets that may be securing

casters to skid

• Place ramp up against skid (to allow case to

smoothly slide off from skid).

• Maintain support of case at all times or center

of gravity may cause case to fall.

• Unlock Casters. Roll unit to rear of skid. Roll

Ramp

down ramp and

off from skid.

Support

while

rolling

case

down

ramp.

Note: Illustrations

shown reflect a

general outline of

sample cases and do

not reflect features or

options of your

particular model.

3. Removing Vertical Lower Front Panels (Slot/Hook Method)

Note: No screw removal required: Simply lift lower front panel up (off hooks) and out (away from case).

View of Front Panel

(Removed & Reversed)

Hooks For Lower

Front Panel

Slots For Lower

Front Panel

Note

Lower Front Panel

Removed & Reversed

For Illustrative

Purposes Only

Note: Illustration below reflects flat front glass

(optional). Your case may have curved front glass.

General slots/hooks design is the same.

Bekijk gratis de handleiding van Structural Concepts Fusion GHS1052RLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.