Structural Concepts Fusion GHPF652LB handleiding

Niet gecategoriseerd

Structural Concepts

13 pagina's

PDF beschikbaar

Handleiding

INSTALLATION, CONT’D: BOLTING UNITS TOGETHER / ELEC. RATINGS / FIELD ACCESS BOX

4. Bolting Units Together (Not All Cases)

Bolt units together at lower base as indicated.

• Remove front and rear panels (no screw removal

required) to drill clearance hole through end panel

and into unit it is being attached to.

• End panel is shown transparent for illustrative

purposes.

• Use SCC-supplied screws for adjoinment.

5. Electrical Ratings

• See SERIAL LABEL LOCATION &

INFORMATION LISTED / TECH INFO &

SERVICE section in this manual for instructions on

attaining electrical information for your case.

--- Model GHPF356LB ---

Field Access / Electrical Box

Model GHPF456LB.5882 Shown / Model GHPF456LB

Has Field Access Box In Same Location

Field Access Box

Ballast Box

6. Field Access Box / Ballast Box / 4 x 4 Box

• Field access box with ballasts (for LED lights)

may be either at rear or at underside of unit (as

shown in illustrations below).

--- Model GHPF456LB.6165 ---

Field Access Box

Ballast Box

Bekijk gratis de handleiding van Structural Concepts Fusion GHPF652LB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.