Structural Concepts Fusion GCD856HHLB handleiding

Niet gecategoriseerd

Structural Concepts

24 pagina's

PDF beschikbaar

Handleiding

CAUTION! LAMP REPLACEMENT GUIDELINES

Incandescent lamps reflect specific size, shape and overall design.

Replacement lamps must be replaced with similar incandescent

lamps meeting the same factory specifications.

CAUTION

CAUTION! ADVERSE CONDITIONS / SPACING ISSUES

• Performance issues caused by adverse conditions are NOT warranted.

• To prevent damage to end panels due to condensation, apply industrial grade

silicone sealant and tightly join to opposite end panels. When not adjoining

cases, keep end panels at least 6” away from walls/structures. Rear panels

must also be kept at least 6” from walls and structures.

• Case must not be exposed to direct sunlight or any heat source.

• To maintain proper case temperature, keep case at least 15-feet from exterior

doors, overhead HVAC vents or any air curtain disruption.

• Self-contained case clearance: 6” min. air intake / 6” min. air discharge.

CAUTION

CAUTION! POWER CORD AND PLUG MAINTENANCE

Risk of electric shock. If cord or plug becomes damaged,

replace only with cord and plug of same type.

OVERVIEW / TYPE / COMPLIANCE / WARNINGS / PRECAUTIONS / WIRING / PLUGS - PAGE 2 of 2

CAUTION! GFCI BREAKER USE REQUIREMENT

If N.E.C. (National Electric Code) or your local code

requires GFCI (Ground Fault Circuit Interrupter) protection,

you MUST use a GFCI breaker in lieu of a GFCI receptacle.

OVERVIEW

• These Structural Concepts cases should be installed and

operated according to these instructions to ensure proper

performance. Improper use will void warranty.

• This unit is designed to display of products in ambient

store conditions with a max. temperature of 80 °F (27 °C) .

COMPLIANCE

• Performance issues when in violation of applicable NEC,

federal, state or local electrical codes are not covered by

warranty. See below.

PRECAUTIONS

• Following are important precautions to prevent damage

to unit or merchandise. Please read carefully!

WIRING DIAGRAM

• Each case has its own wiring diagram folded and in its

own packet. It may be placed near ballast box, field

wiring box, raceway cover, or other related location.

Bekijk gratis de handleiding van Structural Concepts Fusion GCD856HHLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.