Structural Concepts Fusion GCD656HHLB handleiding

Niet gecategoriseerd

Structural Concepts

24 pagina's

PDF beschikbaar

Handleiding

INSTALLATION: REMOVAL FROM PALLET / REMOVING & REPLACING TOE-KICKS

2. Remove From Pallet

• Remove shipping brace that may be securing case to

skid.

• Make sure front and rear toe-kicks are removed from

case before attempting to remove case from skid.

• Caution! Frame support rails can be damaged if case

hits floor with heavy force!

• Support case to prevent tipping.

• Carefully slide unit to rear of skid and tip backward off

skid.

• After case is in position attach front and rear toe-kicks.

• Illustration may not reflect every feature or option of

your particular case.

• Note: Blocking may be necessary to obtain adequate

height.

Slide Skid Out

Note: Illustration shown may

not reflect every feature or

option of your particular case.

J-Bar / Fork-Lift

Tab (Typ.)

Typical

J-Bar Lift

Hook And Magnet

For Front Panel

(No Screw Removal

Required)

1. Remove Toe-Kicks From Case

• Make sure front and rear toe-kicks are removed

from case before removing case from pallet.

• Caution! Frame support rails can be damaged if

case hits floor with heavy force!

• Front and/or rear toe-kicks consist of slots to

connect to hooks and connect to magnets.

• Panels may be lifted up and off case hooks (no

screw removal) and separated from magnets.

• Illustration below shows front panel after removal.

Front Panel (With Slot

For Hook (No Screw

Removal Required)

Bekijk gratis de handleiding van Structural Concepts Fusion GCD656HHLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.