Structural Concepts Elevate BD3632IS handleiding

Niet gecategoriseerd

Structural Concepts

28 pagina's

PDF beschikbaar

Handleiding

FRONT/REAR PANEL REMOVAL / CONNECTIONS CHECK / PREPARING CASE FOR MERCHANDISING

1. Removable Front/Rear Panel

• Front and rear panel can be removed/replaced by

either freeing from magnets or screw removal (as

illustrated below).

2. Check Condenser Package Connections

Before Preparing Case For Merchandising

• Caution! Connections can come loose during

shipment; this can allow water to overflow

onto floor, causing damage!

• When case in is proper location, remove front

and rear panels to check for loose connections,

including overflow condensate pan and plug.

3. Preparing Case For Merchandising

• Caution! Do not attempt to prep case for

merchandising without following Instant

Retail System’s step-by-step instructions!

> Access the QR Code found on the last page this

User Manual. Instant Retail System’s video

presentations will instruct you how to do the following:

> Access keys at case rear.

> Unlock main controller door & remove cables.

> Remove thumb screws, side panel, cables and

envelope (if present).

> Confirm that sim card is in modem by using pin key.

> Release latch to open main door.

> Remove packaging material from shelves along with

cooler manual and leveler adjustment tool.

> Align and connect additional cases to main case.

> Turn on main power supply/battery backup. The

modem, routers, computers, payment terminal and

kiosk screen will energize.

> Energize additional units (if any).

> Level system (so main door will latch properly).

> Install braces (if required).

Magnet

Front Panel

Main Power

Switch

Magnet

Magnets

Programmable

Controller

Rear

Panel

Bekijk gratis de handleiding van Structural Concepts Elevate BD3632IS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.