Structural Concepts Blend NM7255HSSV handleiding

Niet gecategoriseerd

Structural Concepts

33 pagina's

PDF beschikbaar

Handleiding

CASE STARTUP / HEATER SETTINGS / LIGHTS SWITCH / SHUTTING DOWN CASE

• Before placing pre-heated food in case, allow

1 1/2 hours (90-minutes) for case to achieve its

desired temperature.

• If adjusting heater settings, allow 20 minutes at new

settings for temperature to affect product.

3. Light Switch

• Control panel (at case front) is accessible after

lowering front panel.

• Turn lights switch “ON” to turn on lights.

• All LED lights will come on at the same time.

4. Shutting Down Case

• Remove all product from case.

• Turn main power switch to “OFF” position.

• Caution! Deck and shelving are hot. Allow case

to cool for 45 minutes before cleaning.

• Note: When main power is turned back on, you do

NOT need to re-enter settings. Temperatures will

revert back to your LATEST SETTINGS before

shutdown.

1. Main Power Switch

• Control panel is accessible by flipping down front

panel (as illustrated below).

• Turn main power switch “ON” to energize case.

2. Heating Up Case / Adjusting Settings

• Note: Cases are designed to MAINTAIN product

temperatures – NOT heat up product! Do not place

product that is cold or ambient temperature in case.

Model NM4855HSSV (Shown) May

Not Exactly Reflect Every Feature or

Option of Your Particular Case.

Lights

Switches

Main Power

Switch

Programmable

Controllers*

*Note: Only taller units have upper and lower heaters (with two programmable controllers). All others have only ONE

heater (with ONE programmable controller).

Front Panel

Bekijk gratis de handleiding van Structural Concepts Blend NM7255HSSV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.