Structural Concepts Addenda PC7482 handleiding

Niet gecategoriseerd

Structural Concepts

19 pagina's

PDF beschikbaar

Handleiding

INSTALLATION / POSITIONING AND ALIGNING / ADJUSTING LEVELERS

Slide

Skid

Out

Support

required to

prevent

tipping.

1. Remove Unit From Skid

Caution! case must always remain supported or

center of gravity will allow case to fall. Slide unit to

rear of skid and tip backward off skid.

Pry Bar

Base

Frame

Leveler

Adjustable

Wrench

Toe-Kick

3. Adjust Levelers

• After case is in proper position, adjust case so it

is level and plumb (see illustration at right).

• You may need to remove front and/or rear

Toe-Kick to access levelers.

• Use adjustable wrench to adjust leveler.

• Depending upon case weight it may be necessary

to use a Pry Bar to accomplish this task.

• Do not use Pry Bar on Toe-Kick as it may buckle.

• Do not use Pry Bar on End Panel as it may chip.

• Use Pry Bar ONLY on Base Frame to avoid

damaging case.

• See illustration and photos at right.

2. Position & Align Case Alongside Others

• Before adjusting levelers, make certain that the

case is in proper position and, if required, aligned

with adjoining case(s). Line up areas A & B as

shown below.

• This may require the

repositioning of the

case you are

installing or the

already positioned

cases

Alternate Leveler Style

Note: Illustrations Shown May Not

Exactly Reflect Every Feature or

Option of Your Particular Case

Bekijk gratis de handleiding van Structural Concepts Addenda PC7482, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.