Handleiding
Je bekijkt pagina 18 van 28
16
Satellite
antenna type
DiSEqC 1.0
DiSEqC 1.1
DiSEqC 1.2
Unicable I
Tone Burst
Single
If you are looking for the LNB list you have to go to General and press OK.
Select
the operator
General
vùsat
LNB list
Next
Astra4A/SES5 5E On
Eutelsat 7E Off
Eutelsat 9E Off
Hotbird 13E Off
With you can select the satellite (or satellites) to which your dish is addressed. Press OK to access the submenu that allows
you to activate or deactivate the selected satellite and to set its various parameters. After all settings have been made, select
NEXT to continue.
NOTE: To congure the DiSEqC or Unicable parameters it is necessary to select More in the previous steps.
Channel scan
First, please connect the cable.
Star the channel scan now?
If you skip this step,
the channel scan could
be performed in Menu.
Digital and analog channels
Only analogue channels
Only digital channels
Skip scan
First step is to connect the satellite. Then you must start the channel scan. If you skip this step, the channel scan can be done later
by accessing the TV menu. Press OK for your selection.
Scanning
The channel scan
may take a while
to complete.
Digital Channels: 0
Analog Channels: 0
Progress: 7%
In the next step, the channel search is started and takes a few minutes.
Bekijk gratis de handleiding van Strong SRT50UG7773C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Strong |
| Model | SRT50UG7773C |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 3492 MB |