Stoves Richmond Deluxe D900Ei handleiding

Fornuis

Stoves

52 pagina's

PDF beschikbaar

Handleiding

Rotate the control knob to control the hob. The

current power level of a zone is displayed on the

display of the hob.

The control knob locks into position after rotating. The

control knob rotates back automatically if the knob is

rotated to one of the two overwinding positions.

The control knob has 14 positions:

∙ Overwinding to the left (OWL) special function:

Heat up time automatic

∙ Off

∙ Melting Function

∙ Warming Function

∙ Power levels (1-9)

∙ Overwinding to the right (OWR) special function:

Power boost

BASIC HOB FUNCTION

Activating a cook zone

Rotate the control knob to a power level to activate a

cooking zone.

Turning off individual cooking zones

Rotate the control knob to zero to turn off an

individual cooking zone.

Adjusting of power levels

Rotate the control knob anticlockwise to increase

the power of a zone. Rotate the control knob back

clockwise to decrease the power of a zone.

FUNCTIONS

Idle mode

In Idle mode all displays are dark, except if there is

residual heat present.

Rotate one of the control knobs to leave Idle mode. If a

buzzer is available, a sound is played.

The display disappears after 15 seconds when the

control knobs are all rotated to zero. If a buzzer is

available, a sound is played.

Heat up time automatic

The heat up time automatic is a function that boosts

the power of a cooking zone before reaching the set

power level.

Rotate the control knob to the left overwind position

and hold for 2 seconds. Within the next 10 seconds,

rotate the control knob to the desired power level.

The display alternates between the “A” symbol and the

selected power level.

The heat up time automatic function is

not available in level 0, level 9, melting

function, warming function and the

power boost.

Melting Function

The melting function heats the bottom of the pan to

45°C.

Rotate the control knob to the melting function. The

display shows the “u” symbol.

The melting function can be used for 2

hours continuously.

Warming Function

The warming function heats the bottom of the pan to

70°C.

Rotate the control knob to the warming function. The

display shows the “u” symbol.

The warming function can be used for 2

hours continuously.

Power Boost

The power boost is a function that temporarily boosts

the power to a cooking zone.

Rotate the control knob to the right overwind position.

The display shows the “P” symbol.

After 10 minutes the power boost is

automatically switched off.

Bekijk gratis de handleiding van Stoves Richmond Deluxe D900Ei, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.