Handleiding
Je bekijkt pagina 28 van 84
• Touch the power level slider
of the next zone you wish
to control by the timer, and select
the required power level.
• Under the clock symbol ,press
the plus and minus keys
together repeatedly until a red
clock symbol lights up next
to the power level slider of the
zone you wish to control. '0.00'
appears in the timer display.
• The use the plus and/or minus
keys to set the required
duration time.
• A few seconds after the last press
of the plus
or minus key, the
cooking duration time is accepted
and starts to count down.
• The timer display will always
show the time remaining for the
cooking zone which is due to
finish first.
• The red clock symbol will show
brightly next to the power level
slider of the zone which is due to
finish first. This indicates that the
timer display is showing the time
remaining for that zone.
• The red clock symbol will show
dimly next to the power level
slider of the zone which is due to
finish second. This indicates that
the zone is being controlled by
the timer, but the timer display
is not currently displaying the
time remaining for that zone. The
cooking time remaining for that
zone is still counting down in the
background.
• When the cooking duration time
has elapsed, the alarm sounds,
the cooking zone is switched o
automatically, and the indicator
for that cooking zone will show
either '0', or 'H' if there is
residual heat.
• Press the minus key
or the plus
key to silence the alarm, or the
alarm will stop automatically after
about 2 minutes.
• The timer display changes to
show the time remaining for the
cooking zone which is due to
finish next.
• Please repeat the above steps if
you would like the cook-to-o
timer to also control a third,
fourth or fifth zone.
CHECKING, AMENDING
OR CANCELLING THE
COOK-TO-OFF TIMER
To check the cooking time remaining:
If only one cooking zone is being
controlled by the timer (and the
minute minder function is not being
used), the timer display will show
the cooking duration time counting
down continuously.
If more than one cooking zones are
being controlled by the timer, the
timer display will always show the
time remaining for the cooking zone
which is due to finish next.
If you want to check the time
remaining for a dierent zone,
under the clock symbol
, press
the plus and minus keys
together repeatedly until the red
clock symbol shows brightly next
to the power level slider of the zone
you want to check.
The cooking time remaining for that
zone will be displayed for about 5
seconds.
The timer display then reverts to
showing the cooking time remaining
for the zone which is due to finish
next.
28
Bekijk gratis de handleiding van Stoves Richmond 100Ei, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stoves |
| Model | Richmond 100Ei |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 9745 MB |
